Â鶹ÊÓƵ

First year module in thermo-fluids for MES students. FLUID MECHANICS: The basic concepts underlying fluid flows and behaviour are described together with simple fluid properties. The calculation of static fluid forces is the starting point before moving to dynamic fluid effects including mass-flow and energy conservation. Internal flows in pipes and through pumps considering effects of fluid friction, momentum and energy losses in fittings. This will include laminar and turbulent flows and pipe system analysis. THERMODYNAMICS:  Following an introduction on energy consumption, generation and supply from conventional and alternative sources the basic principles of heat and work transfer are described and system thermal efficiency. Thermal properties of working fluids (both liquids and gases) are described. The 1st law of thermodynamics is introduced with applications to processes and cycles for closed and steady-flow systems.

Engineers need to develop a variety of fundamental skills in design methods, reading and producing engineering drawings, and machine operation for component productions. This module is designed to allow students to develop knowledge, skills, and capabilities in the following areas: (i) engineering design process and methods, (ii) basic skills of producing engineering drawings and industry standards used to produce engineering drawings, (iii) skills of using CAD software to create 3D component and assembly models, and 2D engineering drawings, (iv) basic skills of using machine tools to produce mechanical components. The design, engineering drawing, and CAD parts of this module are designed to support learning in other parts of the FHEQ level 5 (Design Make and Evaluation) and 6 curriculum (Group design project). The workshop part of this module is designed to provide possible skills for the student in other parts of the FHEQ level 6 module of the Individual project.

A first level engineering mathematics module designed to briefly revise and then extend A-Level maths material and introduce students to more mathematical techniques to support engineering science modules.

The first part of the module provides an introduction to a range of common material properties and outlines major classes of materials. The second part of the module will aim to extend the students understanding of stress analysis from uni-axial to multi-axial conditions.

Engineers need to develop a variety of experimental, transferable and programming skills as part of their education and on-going professional development. This module provides training in experimental and professional skills. The experimental skills consist of (i) laboratory skills, (ii) basic data handling skills, and (iii) report writing skills. The professional skills consist of (i) computer programming skills in MATLAB, (ii) logical reasoning, analytical and oral presentation skills, and (iii) teamworking skills. The module also provides an introduction to the expectations and responsibilities of a professional engineer.  The laboratory component of this module is designed both to support learning in other parts of the curriculum, through practical experiments, and also to further develop generic and transferable skills, including practical laboratory skills, data handling, a basic understanding of experimental uncertainty and scientific writing. Working as part of a group is an integral part of the laboratory classes. Computing skills are developed through tutorials in Microsoft software and MATLAB programming, whereas the laboratory classes reinforce data handling skills. The professional skills are developed via guest lectures and seminars on topics including ethics; security; equity, diversity and inclusion (EDI); sustainability; writing of CVs and cover letters, and ethics in engineering. Oral communication skills are developed by delivering a presentation to a small group of peers on topics linked to the seminars. The module introduces aspects of the economic, legal, social, ethical, security and environmental contexts in which professional engineers operate.

Engineers frequently use mathematical models, and in particular differential equations in one or more variables and matrices are common in this context. This is a further first level engineering mathematics module designed to support teaching in other engineering science modules by introducing students to concepts and solution methods in these areas. Statistics and probability also play a significant role in the assessment of real-life engineering problems and an introduction to key concepts in this area is also included.

This is an introductory module in electronics for non-electronic/electrical engineering students. It builds a basic understanding of electrical concepts, circuits and instruments relevant to later modules in the course.

This module consists of two components, statics and dynamics. In this module, students will be introduced to the basic principles of statics and provided with an introduction to elementary strength of materials (direct and bending stresses) In dynamics, students will be introduced to the concepts of linear momentum and the mathematical modelling of one and two degree of freedom mechanical systems.

The module aims to equip students with tools, knowledge and opportunity to enable them to thrive both personally and professionally during their university journey and beyond. Empowering students to develop as well-rounded individuals who are confident about their future and and how to navigate life after graduation. Throught this module, students will have the opportunity to participate in sessions and activities that support the development of academic and social self-efficacy, metacognitive stategies, self regulation and resilience, while creating the conditions and environment for students to develop a sense of belonging to their programme of study and wider University.

The purpose of the module is to introduce students to aeronautical aerodynamics, the aerodynamics of aerofoils and wings, aircraft performance and propulsion, and to apply these to build an understanding of and mathematical description of aircraft flight for low-speed subsonic aircraft.  

This module extends from the design modules in the first year. The basic CAE skills generated in year 1 were primarily CAD and in this module these skills are extended to include FEA (finite element analysis). This provides a computer based stress analysis alternative to the analytical stress analysis skills developed in other parts of this programme. Project Management skills will prepare students for a group design activity enabling them to specify, plan and monitor their progress. Alongside formal lectures the students will work in small groups on several short duration design projects to promote team work and put theory into practice. This module will give students the skills and confidence to complete a larger group design project in a subsequent module.

This module is an essential component of the mechanical engineering science program as it directly relates to several core areas of study. By understanding the behavior of structures under static and dynamics loads, students will be better equipped to tackle various engineering challenges, such as designing robust structures, vehicles, and machinery that can endure the deformations and vibrations they may encounter during their operational lifespan. The module builds upon the knowledge gained in earlier engineering courses, including solid mechanics, materials and statics, mathematics, and physics and it serves as a foundation for subsequent specialised modules. By exploring the fundamental concepts and practical applications of deformation and vibration analysis, students will develop a strong foundation for their future engineering studies and professional careers.

The FHEQ Level 5 treatment of thermofluids builds on the material taught at FHEQ Level 4. It is presented in three linked sections: Thermodynamics, Heat Transfer and Fluid Mechanics. The Thermodynamics section introduces the second law of thermodynamics, entropy and associated concepts. These are used in understanding cycles and processes, and consideration of common engine cycles. The Heat Transfer section gives a solid grounding in aspects of heat transfer that are essential for engineers. It covers. fundamental transfer mechanisms for steady state problems. Heat transfer coefficient evaluation and pipe flow problems are considered. Heat exchanger design and simple radiation exchange problems are introduced. The Fluid Mechanics section considers incompressible, inviscid and viscous flow, and introduces compressible flow. Boundary layer theory is related to external flow around streamlined bodies, such as cars and aeroplanes in high Reynolds number flows. Bluff bodies with flow separation are also considered. Compressible flow theory is related to aerospace and other applications where flow velocities are high and fluid density changes become significant.

Second year module for BEng and MEng aerospace engineering students. Aircraft structures engineering is the study of the design and analysis of aircraft structures and is critical to the future and sustainability of the aerospace industry . This module will provide an  understanding of aircraft structures, aircraft aerodynamic loads and aeroelasticity. This builds on previous general modules on materials stress analysis and the module on aerodynamics and flight mechanics, providing students with knowledge and understanding in each of these areas directly applicable to aircraft structures. It complements this knowledge with an introduction to fluid-structure interaction, presenting fundamental loads and aeroelastic effects that arise on aircraft structures. Students will develop skills to analyze diverse types of loads on typical structures using a variety of hand and digital methods.

Control and its application spans across all areas of engineering and beyond. Examples of control systems can be found in automotive, biomedical, aerospace and mechanical engineering. Furthermore, industrial automation leverages control systems to improve efficiency, quality, safety while reducing production costs. This control module introduces to students foundational concepts in control engineering and provide methods for analysing linear dynamic systems and linear control systems that can be applied to different engineering domains. This module gives to students also the foundation for the design of standard control solutions.  

Engineers frequently have to solve engineering problems which are mathematically intractable by approximate numerical methods, normally using software involving some degree of programming. The module introduces the use of mathematical methods to solve complex engineering problems with appropriate IT tools, including Matlab. An introduction to the general, open programming language Python is also given and then applied to the solution of engineering problems.

This module extends and applies learning from the design skills module in semester 1, as well as the basic CAE skills generated in year 1. The project provides an opportunity for students to work on a group-based project and apply the engineering knowledge they have learnt to the design and manufacture of a customer specified product/system. Students will be given a design brief, a set of stock components and access to the workshop. Students will develop their project under supervision by an academic, working towards a contest/evaluation day at the end of the semester.

Third year module in Aerospace Engineering. The module is lecture and tutorial based and continues to develop the understanding of aircraft aerodynamics and design started in ENG2089 and ENG2091 by concentrating on the prediction of lift in incompressible flow, the characteristics of laminar and turbulent boundary layers, compressibility effects in subsonic and transonic flow, and the impact of these topics on the design of aircraft in civil aviation.

This module addresses engineering management in terms of informed decision making, based on technical, quality, commercial and legal requirements. Engineering activities are considered in the context of complex projects, organisational structures and economic/societal/legal/ethical constraints. Modern approaches for efficient and informed decision making are introduced, including the use of advanced project management, systems engineering, uncertainty management, quality management, systems security, company accounting, project evaluation and the management of intellectual property. Legal requirements, associated with managing risk and safety, are considered. The module hence provides key insights and knowledge in preparation for working in a professional engineering environment.

All  students undertake this project module at level 6.  The module focuses on the application of theoretical knowledge and practical techniques to address a complex engineering issue or problem related to the student’s degree discipline.  The issue is explored by means of guided independent study which produces (i) an interim plan and presentation examined orally, (ii) a body of practical work and (iii) a final report. The projects include experimental work, design, analysis, synthesis, computing and information processing in varying proportions consistent with the engineering topic being addressed. Project allocation is based on projects proposed by academic staff (often in liaison with industrial partners) being allocated according to students’ stated preferences regarding both the project type and subject area.  Each project has a designated Principal Supervisor.  

The Aerospace Group Design Project provides students with the opportunity to work on a complete aerospace vehicle design study, in response to a project brief defined in collaboration with industry. Students can extend and broaden their subject knowledge and further develop technical, team working and management skills. Over the lifecycle of the project, there will be changing priorities and responsibilities, so a group will need to adapt their team organisation, their choice of sub-groups and their allocation of individual roles, for each phase of the project. Technical quality, integration, comprehension, creativity, team working, communication and project management are all part of the experience.

First year module in thermo-fluids for MES students. FLUID MECHANICS: The basic concepts underlying fluid flows and behaviour are described together with simple fluid properties. The calculation of static fluid forces is the starting point before moving to dynamic fluid effects including mass-flow and energy conservation. Internal flows in pipes and through pumps considering effects of fluid friction, momentum and energy losses in fittings. This will include laminar and turbulent flows and pipe system analysis. THERMODYNAMICS:  Following an introduction on energy consumption, generation and supply from conventional and alternative sources the basic principles of heat and work transfer are described and system thermal efficiency. Thermal properties of working fluids (both liquids and gases) are described. The 1st law of thermodynamics is introduced with applications to processes and cycles for closed and steady-flow systems.

Engineers need to develop a variety of fundamental skills in design methods, reading and producing engineering drawings, and machine operation for component productions. This module is designed to allow students to develop knowledge, skills, and capabilities in the following areas: (i) engineering design process and methods, (ii) basic skills of producing engineering drawings and industry standards used to produce engineering drawings, (iii) skills of using CAD software to create 3D component and assembly models, and 2D engineering drawings, (iv) basic skills of using machine tools to produce mechanical components. The design, engineering drawing, and CAD parts of this module are designed to support learning in other parts of the FHEQ level 5 (Design Make and Evaluation) and 6 curriculum (Group design project). The workshop part of this module is designed to provide possible skills for the student in other parts of the FHEQ level 6 module of the Individual project.

A first level engineering mathematics module designed to briefly revise and then extend A-Level maths material and introduce students to more mathematical techniques to support engineering science modules.

The first part of the module provides an introduction to a range of common material properties and outlines major classes of materials. The second part of the module will aim to extend the students understanding of stress analysis from uni-axial to multi-axial conditions.

Engineers need to develop a variety of experimental, transferable and programming skills as part of their education and on-going professional development. This module provides training in experimental and professional skills. The experimental skills consist of (i) laboratory skills, (ii) basic data handling skills, and (iii) report writing skills. The professional skills consist of (i) computer programming skills in MATLAB, (ii) logical reasoning, analytical and oral presentation skills, and (iii) teamworking skills. The module also provides an introduction to the expectations and responsibilities of a professional engineer.  The laboratory component of this module is designed both to support learning in other parts of the curriculum, through practical experiments, and also to further develop generic and transferable skills, including practical laboratory skills, data handling, a basic understanding of experimental uncertainty and scientific writing. Working as part of a group is an integral part of the laboratory classes. Computing skills are developed through tutorials in Microsoft software and MATLAB programming, whereas the laboratory classes reinforce data handling skills. The professional skills are developed via guest lectures and seminars on topics including ethics; security; equity, diversity and inclusion (EDI); sustainability; writing of CVs and cover letters, and ethics in engineering. Oral communication skills are developed by delivering a presentation to a small group of peers on topics linked to the seminars. The module introduces aspects of the economic, legal, social, ethical, security and environmental contexts in which professional engineers operate.

Engineers frequently use mathematical models, and in particular differential equations in one or more variables and matrices are common in this context. This is a further first level engineering mathematics module designed to support teaching in other engineering science modules by introducing students to concepts and solution methods in these areas. Statistics and probability also play a significant role in the assessment of real-life engineering problems and an introduction to key concepts in this area is also included.

This is an introductory module in electronics for non-electronic/electrical engineering students. It builds a basic understanding of electrical concepts, circuits and instruments relevant to later modules in the course.

This module consists of two components, statics and dynamics. In this module, students will be introduced to the basic principles of statics and provided with an introduction to elementary strength of materials (direct and bending stresses) In dynamics, students will be introduced to the concepts of linear momentum and the mathematical modelling of one and two degree of freedom mechanical systems.

The module aims to equip students with tools, knowledge and opportunity to enable them to thrive both personally and professionally during their university journey and beyond. Empowering students to develop as well-rounded individuals who are confident about their future and and how to navigate life after graduation. Throught this module, students will have the opportunity to participate in sessions and activities that support the development of academic and social self-efficacy, metacognitive stategies, self regulation and resilience, while creating the conditions and environment for students to develop a sense of belonging to their programme of study and wider University.

The purpose of the module is to introduce students to aeronautical aerodynamics, the aerodynamics of aerofoils and wings, aircraft performance and propulsion, and to apply these to build an understanding of and mathematical description of aircraft flight for low-speed subsonic aircraft.  

This module extends from the design modules in the first year. The basic CAE skills generated in year 1 were primarily CAD and in this module these skills are extended to include FEA (finite element analysis). This provides a computer based stress analysis alternative to the analytical stress analysis skills developed in other parts of this programme. Project Management skills will prepare students for a group design activity enabling them to specify, plan and monitor their progress. Alongside formal lectures the students will work in small groups on several short duration design projects to promote team work and put theory into practice. This module will give students the skills and confidence to complete a larger group design project in a subsequent module.

This module is an essential component of the mechanical engineering science program as it directly relates to several core areas of study. By understanding the behavior of structures under static and dynamics loads, students will be better equipped to tackle various engineering challenges, such as designing robust structures, vehicles, and machinery that can endure the deformations and vibrations they may encounter during their operational lifespan. The module builds upon the knowledge gained in earlier engineering courses, including solid mechanics, materials and statics, mathematics, and physics and it serves as a foundation for subsequent specialised modules. By exploring the fundamental concepts and practical applications of deformation and vibration analysis, students will develop a strong foundation for their future engineering studies and professional careers.

The FHEQ Level 5 treatment of thermofluids builds on the material taught at FHEQ Level 4. It is presented in three linked sections: Thermodynamics, Heat Transfer and Fluid Mechanics. The Thermodynamics section introduces the second law of thermodynamics, entropy and associated concepts. These are used in understanding cycles and processes, and consideration of common engine cycles. The Heat Transfer section gives a solid grounding in aspects of heat transfer that are essential for engineers. It covers. fundamental transfer mechanisms for steady state problems. Heat transfer coefficient evaluation and pipe flow problems are considered. Heat exchanger design and simple radiation exchange problems are introduced. The Fluid Mechanics section considers incompressible, inviscid and viscous flow, and introduces compressible flow. Boundary layer theory is related to external flow around streamlined bodies, such as cars and aeroplanes in high Reynolds number flows. Bluff bodies with flow separation are also considered. Compressible flow theory is related to aerospace and other applications where flow velocities are high and fluid density changes become significant.

Second year module for BEng and MEng aerospace engineering students. Aircraft structures engineering is the study of the design and analysis of aircraft structures and is critical to the future and sustainability of the aerospace industry . This module will provide an  understanding of aircraft structures, aircraft aerodynamic loads and aeroelasticity. This builds on previous general modules on materials stress analysis and the module on aerodynamics and flight mechanics, providing students with knowledge and understanding in each of these areas directly applicable to aircraft structures. It complements this knowledge with an introduction to fluid-structure interaction, presenting fundamental loads and aeroelastic effects that arise on aircraft structures. Students will develop skills to analyze diverse types of loads on typical structures using a variety of hand and digital methods.

Control and its application spans across all areas of engineering and beyond. Examples of control systems can be found in automotive, biomedical, aerospace and mechanical engineering. Furthermore, industrial automation leverages control systems to improve efficiency, quality, safety while reducing production costs. This control module introduces to students foundational concepts in control engineering and provide methods for analysing linear dynamic systems and linear control systems that can be applied to different engineering domains. This module gives to students also the foundation for the design of standard control solutions.  

Engineers frequently have to solve engineering problems which are mathematically intractable by approximate numerical methods, normally using software involving some degree of programming. The module introduces the use of mathematical methods to solve complex engineering problems with appropriate IT tools, including Matlab. An introduction to the general, open programming language Python is also given and then applied to the solution of engineering problems.

This module extends and applies learning from the design skills module in semester 1, as well as the basic CAE skills generated in year 1. The project provides an opportunity for students to work on a group-based project and apply the engineering knowledge they have learnt to the design and manufacture of a customer specified product/system. Students will be given a design brief, a set of stock components and access to the workshop. Students will develop their project under supervision by an academic, working towards a contest/evaluation day at the end of the semester.

Third year module in Aerospace Engineering. The module is lecture and tutorial based and continues to develop the understanding of aircraft aerodynamics and design started in ENG2089 and ENG2091 by concentrating on the prediction of lift in incompressible flow, the characteristics of laminar and turbulent boundary layers, compressibility effects in subsonic and transonic flow, and the impact of these topics on the design of aircraft in civil aviation.

This module addresses engineering management in terms of informed decision making, based on technical, quality, commercial and legal requirements. Engineering activities are considered in the context of complex projects, organisational structures and economic/societal/legal/ethical constraints. Modern approaches for efficient and informed decision making are introduced, including the use of advanced project management, systems engineering, uncertainty management, quality management, systems security, company accounting, project evaluation and the management of intellectual property. Legal requirements, associated with managing risk and safety, are considered. The module hence provides key insights and knowledge in preparation for working in a professional engineering environment.

All  students undertake this project module at level 6.  The module focuses on the application of theoretical knowledge and practical techniques to address a complex engineering issue or problem related to the student’s degree discipline.  The issue is explored by means of guided independent study which produces (i) an interim plan and presentation examined orally, (ii) a body of practical work and (iii) a final report. The projects include experimental work, design, analysis, synthesis, computing and information processing in varying proportions consistent with the engineering topic being addressed. Project allocation is based on projects proposed by academic staff (often in liaison with industrial partners) being allocated according to students’ stated preferences regarding both the project type and subject area.  Each project has a designated Principal Supervisor.  

The Aerospace Group Design Project provides students with the opportunity to work on a complete aerospace vehicle design study, in response to a project brief defined in collaboration with industry. Students can extend and broaden their subject knowledge and further develop technical, team working and management skills. Over the lifecycle of the project, there will be changing priorities and responsibilities, so a group will need to adapt their team organisation, their choice of sub-groups and their allocation of individual roles, for each phase of the project. Technical quality, integration, comprehension, creativity, team working, communication and project management are all part of the experience.

This mathematics module is designed to reinforce and broaden basic A-Level mathematics material, develop problem solving skills and prepare students for the more advanced mathematical concepts and problem-solving scenarios in the semester 2 modules.The priority is to develop the students’ ability to solve real- world problems in a confident manner.  The concepts delivered on this module reflect the skills and knowledge required to understand the physical around us. This is vital as mathematics plays a critical role in the students’ future employability and achievement on their respective undergraduate choices.

This module introduces several principles and processes which underpin most physical science and engineering disciplines, which you are likely to study beyond the Foundation Year. Specifically, you will study topics that include S.I. units and measurement theory, electric and magnetic fields and their interactions, the properties of ideal gases, heat transfer and thermodynamics, fluid statics and dynamics, and engineering instrumentation and measurement. You will attend several lectures and a tutorial each teaching week alongside guided independent study opportunities to develop your understanding of topics more deeply, supported by the use of the university’s virtual learning platform.

The emphasis of this module is on the development of digital capabilities, academic skills and problem-solving skills. The module will facilitate the development of competency in working with software commonly used to support calculations, analysis and presentation. Microsoft Excel will be used for spreadsheet-based calculations and experimental data analysis. MATLAB will be used as a platform for developing elementary programming skills and applying various processes to novel problem-solving scenarios. The breadth and depth of digital capabilities will be further enhanced by working with HTML, CSS and JavaScript within the GitHub environment to develop a webpage, presenting the student's research project narrative. The project provides students with an opportunity to carry out guided research and prepare an online article on one of many discipline-specific topic choices. Students will develop a wide range of writing, referencing and other important academic skills and learn how to use embedded and/or interactive online content to support the presentation of their online article.

This module builds on ENG0011 Mathematics A and is designed to reinforce and broaden A-Level Calculus, Vectors, Matrices and Complex Numbers. The students will continue to develop their ability to solve real- world problems in a confident manner.  The concepts delivered on this module reflect the skills and knowledge required to understand the physical world around us. This is vital, as mathematics plays a critical role in the students’ future employability and achievement on their respective undergraduate courses. On completion of the module students are prepared for the more advanced Mathematical concepts and problem solving scenarios in the first year of their Engineering or Physical Sciences degree.

This module introduces several principles and processes which underpin most physical science and engineering disciplines, which you are likely to study beyond the Foundation Year. Specifically, you will study topics that include vectors and scalars, equations of motion under constant acceleration, momentum conservation, simple harmonic motion and wave theory. You will attend several lectures and a tutorial each teaching week alongside guided independent study opportunities to develop your understanding of topics more deeply, supported by the use of the university’s virtual learning platform.

A foundation level physics module designed to reinforce and broaden basic A-Level Physics material in electricity and electronics, nuclear physics, develop practical skills, and prepare students for the more advanced concepts and applications in the first year of their Engineering or Physical Sciences degree. You will attend several lectures and a tutorial each teaching week alongside guided independent study opportunities to develop your understanding of topics more deeply, supported using the university’s virtual learning platform.

During this year-long module, students develop a range of laboratory and transferable skills through both individual laboratory work and group project work. The content of this module is designed to consolidate knowledge gained in ENG0013 (semester 1) and ENG0015/16/17 (semester 2) modules.   Semester 1 focuses on core Engineering and Physical Sciences laboratory work and guides students through the basic skills of laboratory work, recording work in a lab diary, and lab report writing. Alongside this individual laboratory work, students participate in a group project; this involves working in a small group (5-8 students) to design an experiment, collect data, present their experimental findings as an academic poster, and report their findings to peers via a group oral presentation. Students are guided through the development of teamworking, project management, presentation, and digital skills (e.g., in using MS Teams as a group communication platform) whilst working on this project.   Semester 2 provides an opportunity for subject-stream specific practical work (individual) where students will build on the laboratory and lab report writing skills developed in semester 1 to produce a full lab report. Students participate in a further group project in semester 2 where they build upon the skills developed in semester 1.  Students work as a team to find and develop an engineering / physical sciences idea into a potentially viable business case.  Student groups produce a written business case report and pitch their ideas to a panel including University Student Enterprise experts.

This mathematics module is designed to reinforce and broaden basic A-Level mathematics material, develop problem solving skills and prepare students for the more advanced mathematical concepts and problem-solving scenarios in the semester 2 modules.The priority is to develop the students’ ability to solve real- world problems in a confident manner.  The concepts delivered on this module reflect the skills and knowledge required to understand the physical around us. This is vital as mathematics plays a critical role in the students’ future employability and achievement on their respective undergraduate choices.

This module introduces several principles and processes which underpin most physical science and engineering disciplines, which you are likely to study beyond the Foundation Year. Specifically, you will study topics that include S.I. units and measurement theory, electric and magnetic fields and their interactions, the properties of ideal gases, heat transfer and thermodynamics, fluid statics and dynamics, and engineering instrumentation and measurement. You will attend several lectures and a tutorial each teaching week alongside guided independent study opportunities to develop your understanding of topics more deeply, supported by the use of the university’s virtual learning platform.

The emphasis of this module is on the development of digital capabilities, academic skills and problem-solving skills. The module will facilitate the development of competency in working with software commonly used to support calculations, analysis and presentation. Microsoft Excel will be used for spreadsheet-based calculations and experimental data analysis. MATLAB will be used as a platform for developing elementary programming skills and applying various processes to novel problem-solving scenarios. The breadth and depth of digital capabilities will be further enhanced by working with HTML, CSS and JavaScript within the GitHub environment to develop a webpage, presenting the student's research project narrative. The project provides students with an opportunity to carry out guided research and prepare an online article on one of many discipline-specific topic choices. Students will develop a wide range of writing, referencing and other important academic skills and learn how to use embedded and/or interactive online content to support the presentation of their online article.

This module builds on ENG0011 Mathematics A and is designed to reinforce and broaden A-Level Calculus, Vectors, Matrices and Complex Numbers. The students will continue to develop their ability to solve real- world problems in a confident manner.  The concepts delivered on this module reflect the skills and knowledge required to understand the physical world around us. This is vital, as mathematics plays a critical role in the students’ future employability and achievement on their respective undergraduate courses. On completion of the module students are prepared for the more advanced Mathematical concepts and problem solving scenarios in the first year of their Engineering or Physical Sciences degree.

This module introduces several principles and processes which underpin most physical science and engineering disciplines, which you are likely to study beyond the Foundation Year. Specifically, you will study topics that include vectors and scalars, equations of motion under constant acceleration, momentum conservation, simple harmonic motion and wave theory. You will attend several lectures and a tutorial each teaching week alongside guided independent study opportunities to develop your understanding of topics more deeply, supported by the use of the university’s virtual learning platform.

A foundation level physics module designed to reinforce and broaden basic A-Level Physics material in electricity and electronics, nuclear physics, develop practical skills, and prepare students for the more advanced concepts and applications in the first year of their Engineering or Physical Sciences degree. You will attend several lectures and a tutorial each teaching week alongside guided independent study opportunities to develop your understanding of topics more deeply, supported using the university’s virtual learning platform.

During this year-long module, students develop a range of laboratory and transferable skills through both individual laboratory work and group project work. The content of this module is designed to consolidate knowledge gained in ENG0013 (semester 1) and ENG0015/16/17 (semester 2) modules.   Semester 1 focuses on core Engineering and Physical Sciences laboratory work and guides students through the basic skills of laboratory work, recording work in a lab diary, and lab report writing. Alongside this individual laboratory work, students participate in a group project; this involves working in a small group (5-8 students) to design an experiment, collect data, present their experimental findings as an academic poster, and report their findings to peers via a group oral presentation. Students are guided through the development of teamworking, project management, presentation, and digital skills (e.g., in using MS Teams as a group communication platform) whilst working on this project.   Semester 2 provides an opportunity for subject-stream specific practical work (individual) where students will build on the laboratory and lab report writing skills developed in semester 1 to produce a full lab report. Students participate in a further group project in semester 2 where they build upon the skills developed in semester 1.  Students work as a team to find and develop an engineering / physical sciences idea into a potentially viable business case.  Student groups produce a written business case report and pitch their ideas to a panel including University Student Enterprise experts.

First year module in thermo-fluids for MES students. FLUID MECHANICS: The basic concepts underlying fluid flows and behaviour are described together with simple fluid properties. The calculation of static fluid forces is the starting point before moving to dynamic fluid effects including mass-flow and energy conservation. Internal flows in pipes and through pumps considering effects of fluid friction, momentum and energy losses in fittings. This will include laminar and turbulent flows and pipe system analysis. THERMODYNAMICS:  Following an introduction on energy consumption, generation and supply from conventional and alternative sources the basic principles of heat and work transfer are described and system thermal efficiency. Thermal properties of working fluids (both liquids and gases) are described. The 1st law of thermodynamics is introduced with applications to processes and cycles for closed and steady-flow systems.

Engineers need to develop a variety of fundamental skills in design methods, reading and producing engineering drawings, and machine operation for component productions. This module is designed to allow students to develop knowledge, skills, and capabilities in the following areas: (i) engineering design process and methods, (ii) basic skills of producing engineering drawings and industry standards used to produce engineering drawings, (iii) skills of using CAD software to create 3D component and assembly models, and 2D engineering drawings, (iv) basic skills of using machine tools to produce mechanical components. The design, engineering drawing, and CAD parts of this module are designed to support learning in other parts of the FHEQ level 5 (Design Make and Evaluation) and 6 curriculum (Group design project). The workshop part of this module is designed to provide possible skills for the student in other parts of the FHEQ level 6 module of the Individual project.

A first level engineering mathematics module designed to briefly revise and then extend A-Level maths material and introduce students to more mathematical techniques to support engineering science modules.

The first part of the module provides an introduction to a range of common material properties and outlines major classes of materials. The second part of the module will aim to extend the students understanding of stress analysis from uni-axial to multi-axial conditions.

Engineers need to develop a variety of experimental, transferable and programming skills as part of their education and on-going professional development. This module provides training in experimental and professional skills. The experimental skills consist of (i) laboratory skills, (ii) basic data handling skills, and (iii) report writing skills. The professional skills consist of (i) computer programming skills in MATLAB, (ii) logical reasoning, analytical and oral presentation skills, and (iii) teamworking skills. The module also provides an introduction to the expectations and responsibilities of a professional engineer.  The laboratory component of this module is designed both to support learning in other parts of the curriculum, through practical experiments, and also to further develop generic and transferable skills, including practical laboratory skills, data handling, a basic understanding of experimental uncertainty and scientific writing. Working as part of a group is an integral part of the laboratory classes. Computing skills are developed through tutorials in Microsoft software and MATLAB programming, whereas the laboratory classes reinforce data handling skills. The professional skills are developed via guest lectures and seminars on topics including ethics; security; equity, diversity and inclusion (EDI); sustainability; writing of CVs and cover letters, and ethics in engineering. Oral communication skills are developed by delivering a presentation to a small group of peers on topics linked to the seminars. The module introduces aspects of the economic, legal, social, ethical, security and environmental contexts in which professional engineers operate.

Engineers frequently use mathematical models, and in particular differential equations in one or more variables and matrices are common in this context. This is a further first level engineering mathematics module designed to support teaching in other engineering science modules by introducing students to concepts and solution methods in these areas. Statistics and probability also play a significant role in the assessment of real-life engineering problems and an introduction to key concepts in this area is also included.

This is an introductory module in electronics for non-electronic/electrical engineering students. It builds a basic understanding of electrical concepts, circuits and instruments relevant to later modules in the course.

This module consists of two components, statics and dynamics. In this module, students will be introduced to the basic principles of statics and provided with an introduction to elementary strength of materials (direct and bending stresses) In dynamics, students will be introduced to the concepts of linear momentum and the mathematical modelling of one and two degree of freedom mechanical systems.

The module aims to equip students with tools, knowledge and opportunity to enable them to thrive both personally and professionally during their university journey and beyond. Empowering students to develop as well-rounded individuals who are confident about their future and and how to navigate life after graduation. Throught this module, students will have the opportunity to participate in sessions and activities that support the development of academic and social self-efficacy, metacognitive stategies, self regulation and resilience, while creating the conditions and environment for students to develop a sense of belonging to their programme of study and wider University.

The purpose of the module is to introduce students to aeronautical aerodynamics, the aerodynamics of aerofoils and wings, aircraft performance and propulsion, and to apply these to build an understanding of and mathematical description of aircraft flight for low-speed subsonic aircraft.  

This module extends from the design modules in the first year. The basic CAE skills generated in year 1 were primarily CAD and in this module these skills are extended to include FEA (finite element analysis). This provides a computer based stress analysis alternative to the analytical stress analysis skills developed in other parts of this programme. Project Management skills will prepare students for a group design activity enabling them to specify, plan and monitor their progress. Alongside formal lectures the students will work in small groups on several short duration design projects to promote team work and put theory into practice. This module will give students the skills and confidence to complete a larger group design project in a subsequent module.

This module is an essential component of the mechanical engineering science program as it directly relates to several core areas of study. By understanding the behavior of structures under static and dynamics loads, students will be better equipped to tackle various engineering challenges, such as designing robust structures, vehicles, and machinery that can endure the deformations and vibrations they may encounter during their operational lifespan. The module builds upon the knowledge gained in earlier engineering courses, including solid mechanics, materials and statics, mathematics, and physics and it serves as a foundation for subsequent specialised modules. By exploring the fundamental concepts and practical applications of deformation and vibration analysis, students will develop a strong foundation for their future engineering studies and professional careers.

The FHEQ Level 5 treatment of thermofluids builds on the material taught at FHEQ Level 4. It is presented in three linked sections: Thermodynamics, Heat Transfer and Fluid Mechanics. The Thermodynamics section introduces the second law of thermodynamics, entropy and associated concepts. These are used in understanding cycles and processes, and consideration of common engine cycles. The Heat Transfer section gives a solid grounding in aspects of heat transfer that are essential for engineers. It covers. fundamental transfer mechanisms for steady state problems. Heat transfer coefficient evaluation and pipe flow problems are considered. Heat exchanger design and simple radiation exchange problems are introduced. The Fluid Mechanics section considers incompressible, inviscid and viscous flow, and introduces compressible flow. Boundary layer theory is related to external flow around streamlined bodies, such as cars and aeroplanes in high Reynolds number flows. Bluff bodies with flow separation are also considered. Compressible flow theory is related to aerospace and other applications where flow velocities are high and fluid density changes become significant.

Second year module for BEng and MEng aerospace engineering students. Aircraft structures engineering is the study of the design and analysis of aircraft structures and is critical to the future and sustainability of the aerospace industry . This module will provide an  understanding of aircraft structures, aircraft aerodynamic loads and aeroelasticity. This builds on previous general modules on materials stress analysis and the module on aerodynamics and flight mechanics, providing students with knowledge and understanding in each of these areas directly applicable to aircraft structures. It complements this knowledge with an introduction to fluid-structure interaction, presenting fundamental loads and aeroelastic effects that arise on aircraft structures. Students will develop skills to analyze diverse types of loads on typical structures using a variety of hand and digital methods.

Control and its application spans across all areas of engineering and beyond. Examples of control systems can be found in automotive, biomedical, aerospace and mechanical engineering. Furthermore, industrial automation leverages control systems to improve efficiency, quality, safety while reducing production costs. This control module introduces to students foundational concepts in control engineering and provide methods for analysing linear dynamic systems and linear control systems that can be applied to different engineering domains. This module gives to students also the foundation for the design of standard control solutions.  

Engineers frequently have to solve engineering problems which are mathematically intractable by approximate numerical methods, normally using software involving some degree of programming. The module introduces the use of mathematical methods to solve complex engineering problems with appropriate IT tools, including Matlab. An introduction to the general, open programming language Python is also given and then applied to the solution of engineering problems.

This module extends and applies learning from the design skills module in semester 1, as well as the basic CAE skills generated in year 1. The project provides an opportunity for students to work on a group-based project and apply the engineering knowledge they have learnt to the design and manufacture of a customer specified product/system. Students will be given a design brief, a set of stock components and access to the workshop. Students will develop their project under supervision by an academic, working towards a contest/evaluation day at the end of the semester.

Third year module in Aerospace Engineering. The module is lecture and tutorial based and continues to develop the understanding of aircraft aerodynamics and design started in ENG2089 and ENG2091 by concentrating on the prediction of lift in incompressible flow, the characteristics of laminar and turbulent boundary layers, compressibility effects in subsonic and transonic flow, and the impact of these topics on the design of aircraft in civil aviation.

This module addresses engineering management in terms of informed decision making, based on technical, quality, commercial and legal requirements. Engineering activities are considered in the context of complex projects, organisational structures and economic/societal/legal/ethical constraints. Modern approaches for efficient and informed decision making are introduced, including the use of advanced project management, systems engineering, uncertainty management, quality management, systems security, company accounting, project evaluation and the management of intellectual property. Legal requirements, associated with managing risk and safety, are considered. The module hence provides key insights and knowledge in preparation for working in a professional engineering environment.

All  students undertake this project module at level 6.  The module focuses on the application of theoretical knowledge and practical techniques to address a complex engineering issue or problem related to the student’s degree discipline.  The issue is explored by means of guided independent study which produces (i) an interim plan and presentation examined orally, (ii) a body of practical work and (iii) a final report. The projects include experimental work, design, analysis, synthesis, computing and information processing in varying proportions consistent with the engineering topic being addressed. Project allocation is based on projects proposed by academic staff (often in liaison with industrial partners) being allocated according to students’ stated preferences regarding both the project type and subject area.  Each project has a designated Principal Supervisor.  

The Aerospace Group Design Project provides students with the opportunity to work on a complete aerospace vehicle design study, in response to a project brief defined in collaboration with industry. Students can extend and broaden their subject knowledge and further develop technical, team working and management skills. Over the lifecycle of the project, there will be changing priorities and responsibilities, so a group will need to adapt their team organisation, their choice of sub-groups and their allocation of individual roles, for each phase of the project. Technical quality, integration, comprehension, creativity, team working, communication and project management are all part of the experience.

Module purpose:  This module was conceived to answer the SARTOR 3 requirement that each MEng student participates in a multi-disciplinary design activity. It involves students from Aerospace, Civil, Chemical, Electronic, Mechanical and Medical Engineering working in groups which contain at least 3, and often 4, disciplines. The projects are conceived by Royal Academy of Engineering (RAE) Visiting Professors from Industry (who enjoy the active support of their sponsoring organisation). It aims to emulate an intensive Industrial Design Project.      

Engineering activity can have a significant societal impact and engineers must operate in a responsible and ethical manner, recognise the importance of diversity, and help ensure that the benefits of innovation and progress are shared equitably and do not compromise the natural environment or deplete natural resources to the detriment of future generations.

The module covers the principles of linear elastic and elastic plastic fracture mechanics and their application to predicting the performance of different materials and associated structural components under short-term and long term loading.  Further the concepts and principles underlying finite element stress analysis and its application are presented. Students digital capabilities are developed throughout this module including some basic data handling and programming skills, specifically using mathematical formulae and functions, including: variables, assignments, operators, built-in functions and plotting, Matlab scripts, and functions. A key element of the module is problem solving, thus developing students' resourcefulness. Efficient mechanical design, covering a full range of engineering materials, facilitates lightweighting, and in this way supports a sustainability agenda.

First year module in thermo-fluids for MES students. FLUID MECHANICS: The basic concepts underlying fluid flows and behaviour are described together with simple fluid properties. The calculation of static fluid forces is the starting point before moving to dynamic fluid effects including mass-flow and energy conservation. Internal flows in pipes and through pumps considering effects of fluid friction, momentum and energy losses in fittings. This will include laminar and turbulent flows and pipe system analysis. THERMODYNAMICS:  Following an introduction on energy consumption, generation and supply from conventional and alternative sources the basic principles of heat and work transfer are described and system thermal efficiency. Thermal properties of working fluids (both liquids and gases) are described. The 1st law of thermodynamics is introduced with applications to processes and cycles for closed and steady-flow systems.

Engineers need to develop a variety of fundamental skills in design methods, reading and producing engineering drawings, and machine operation for component productions. This module is designed to allow students to develop knowledge, skills, and capabilities in the following areas: (i) engineering design process and methods, (ii) basic skills of producing engineering drawings and industry standards used to produce engineering drawings, (iii) skills of using CAD software to create 3D component and assembly models, and 2D engineering drawings, (iv) basic skills of using machine tools to produce mechanical components. The design, engineering drawing, and CAD parts of this module are designed to support learning in other parts of the FHEQ level 5 (Design Make and Evaluation) and 6 curriculum (Group design project). The workshop part of this module is designed to provide possible skills for the student in other parts of the FHEQ level 6 module of the Individual project.

A first level engineering mathematics module designed to briefly revise and then extend A-Level maths material and introduce students to more mathematical techniques to support engineering science modules.

The first part of the module provides an introduction to a range of common material properties and outlines major classes of materials. The second part of the module will aim to extend the students understanding of stress analysis from uni-axial to multi-axial conditions.

Engineers need to develop a variety of experimental, transferable and programming skills as part of their education and on-going professional development. This module provides training in experimental and professional skills. The experimental skills consist of (i) laboratory skills, (ii) basic data handling skills, and (iii) report writing skills. The professional skills consist of (i) computer programming skills in MATLAB, (ii) logical reasoning, analytical and oral presentation skills, and (iii) teamworking skills. The module also provides an introduction to the expectations and responsibilities of a professional engineer.  The laboratory component of this module is designed both to support learning in other parts of the curriculum, through practical experiments, and also to further develop generic and transferable skills, including practical laboratory skills, data handling, a basic understanding of experimental uncertainty and scientific writing. Working as part of a group is an integral part of the laboratory classes. Computing skills are developed through tutorials in Microsoft software and MATLAB programming, whereas the laboratory classes reinforce data handling skills. The professional skills are developed via guest lectures and seminars on topics including ethics; security; equity, diversity and inclusion (EDI); sustainability; writing of CVs and cover letters, and ethics in engineering. Oral communication skills are developed by delivering a presentation to a small group of peers on topics linked to the seminars. The module introduces aspects of the economic, legal, social, ethical, security and environmental contexts in which professional engineers operate.

Engineers frequently use mathematical models, and in particular differential equations in one or more variables and matrices are common in this context. This is a further first level engineering mathematics module designed to support teaching in other engineering science modules by introducing students to concepts and solution methods in these areas. Statistics and probability also play a significant role in the assessment of real-life engineering problems and an introduction to key concepts in this area is also included.

This is an introductory module in electronics for non-electronic/electrical engineering students. It builds a basic understanding of electrical concepts, circuits and instruments relevant to later modules in the course.

This module consists of two components, statics and dynamics. In this module, students will be introduced to the basic principles of statics and provided with an introduction to elementary strength of materials (direct and bending stresses) In dynamics, students will be introduced to the concepts of linear momentum and the mathematical modelling of one and two degree of freedom mechanical systems.

The module aims to equip students with tools, knowledge and opportunity to enable them to thrive both personally and professionally during their university journey and beyond. Empowering students to develop as well-rounded individuals who are confident about their future and and how to navigate life after graduation. Throught this module, students will have the opportunity to participate in sessions and activities that support the development of academic and social self-efficacy, metacognitive stategies, self regulation and resilience, while creating the conditions and environment for students to develop a sense of belonging to their programme of study and wider University.

The purpose of the module is to introduce students to aeronautical aerodynamics, the aerodynamics of aerofoils and wings, aircraft performance and propulsion, and to apply these to build an understanding of and mathematical description of aircraft flight for low-speed subsonic aircraft.  

This module extends from the design modules in the first year. The basic CAE skills generated in year 1 were primarily CAD and in this module these skills are extended to include FEA (finite element analysis). This provides a computer based stress analysis alternative to the analytical stress analysis skills developed in other parts of this programme. Project Management skills will prepare students for a group design activity enabling them to specify, plan and monitor their progress. Alongside formal lectures the students will work in small groups on several short duration design projects to promote team work and put theory into practice. This module will give students the skills and confidence to complete a larger group design project in a subsequent module.

This module is an essential component of the mechanical engineering science program as it directly relates to several core areas of study. By understanding the behavior of structures under static and dynamics loads, students will be better equipped to tackle various engineering challenges, such as designing robust structures, vehicles, and machinery that can endure the deformations and vibrations they may encounter during their operational lifespan. The module builds upon the knowledge gained in earlier engineering courses, including solid mechanics, materials and statics, mathematics, and physics and it serves as a foundation for subsequent specialised modules. By exploring the fundamental concepts and practical applications of deformation and vibration analysis, students will develop a strong foundation for their future engineering studies and professional careers.

The FHEQ Level 5 treatment of thermofluids builds on the material taught at FHEQ Level 4. It is presented in three linked sections: Thermodynamics, Heat Transfer and Fluid Mechanics. The Thermodynamics section introduces the second law of thermodynamics, entropy and associated concepts. These are used in understanding cycles and processes, and consideration of common engine cycles. The Heat Transfer section gives a solid grounding in aspects of heat transfer that are essential for engineers. It covers. fundamental transfer mechanisms for steady state problems. Heat transfer coefficient evaluation and pipe flow problems are considered. Heat exchanger design and simple radiation exchange problems are introduced. The Fluid Mechanics section considers incompressible, inviscid and viscous flow, and introduces compressible flow. Boundary layer theory is related to external flow around streamlined bodies, such as cars and aeroplanes in high Reynolds number flows. Bluff bodies with flow separation are also considered. Compressible flow theory is related to aerospace and other applications where flow velocities are high and fluid density changes become significant.

Second year module for BEng and MEng aerospace engineering students. Aircraft structures engineering is the study of the design and analysis of aircraft structures and is critical to the future and sustainability of the aerospace industry . This module will provide an  understanding of aircraft structures, aircraft aerodynamic loads and aeroelasticity. This builds on previous general modules on materials stress analysis and the module on aerodynamics and flight mechanics, providing students with knowledge and understanding in each of these areas directly applicable to aircraft structures. It complements this knowledge with an introduction to fluid-structure interaction, presenting fundamental loads and aeroelastic effects that arise on aircraft structures. Students will develop skills to analyze diverse types of loads on typical structures using a variety of hand and digital methods.

Control and its application spans across all areas of engineering and beyond. Examples of control systems can be found in automotive, biomedical, aerospace and mechanical engineering. Furthermore, industrial automation leverages control systems to improve efficiency, quality, safety while reducing production costs. This control module introduces to students foundational concepts in control engineering and provide methods for analysing linear dynamic systems and linear control systems that can be applied to different engineering domains. This module gives to students also the foundation for the design of standard control solutions.  

Engineers frequently have to solve engineering problems which are mathematically intractable by approximate numerical methods, normally using software involving some degree of programming. The module introduces the use of mathematical methods to solve complex engineering problems with appropriate IT tools, including Matlab. An introduction to the general, open programming language Python is also given and then applied to the solution of engineering problems.

This module extends and applies learning from the design skills module in semester 1, as well as the basic CAE skills generated in year 1. The project provides an opportunity for students to work on a group-based project and apply the engineering knowledge they have learnt to the design and manufacture of a customer specified product/system. Students will be given a design brief, a set of stock components and access to the workshop. Students will develop their project under supervision by an academic, working towards a contest/evaluation day at the end of the semester.

Third year module in Aerospace Engineering. The module is lecture and tutorial based and continues to develop the understanding of aircraft aerodynamics and design started in ENG2089 and ENG2091 by concentrating on the prediction of lift in incompressible flow, the characteristics of laminar and turbulent boundary layers, compressibility effects in subsonic and transonic flow, and the impact of these topics on the design of aircraft in civil aviation.

This module addresses engineering management in terms of informed decision making, based on technical, quality, commercial and legal requirements. Engineering activities are considered in the context of complex projects, organisational structures and economic/societal/legal/ethical constraints. Modern approaches for efficient and informed decision making are introduced, including the use of advanced project management, systems engineering, uncertainty management, quality management, systems security, company accounting, project evaluation and the management of intellectual property. Legal requirements, associated with managing risk and safety, are considered. The module hence provides key insights and knowledge in preparation for working in a professional engineering environment.

All  students undertake this project module at level 6.  The module focuses on the application of theoretical knowledge and practical techniques to address a complex engineering issue or problem related to the student’s degree discipline.  The issue is explored by means of guided independent study which produces (i) an interim plan and presentation examined orally, (ii) a body of practical work and (iii) a final report. The projects include experimental work, design, analysis, synthesis, computing and information processing in varying proportions consistent with the engineering topic being addressed. Project allocation is based on projects proposed by academic staff (often in liaison with industrial partners) being allocated according to students’ stated preferences regarding both the project type and subject area.  Each project has a designated Principal Supervisor.  

The Aerospace Group Design Project provides students with the opportunity to work on a complete aerospace vehicle design study, in response to a project brief defined in collaboration with industry. Students can extend and broaden their subject knowledge and further develop technical, team working and management skills. Over the lifecycle of the project, there will be changing priorities and responsibilities, so a group will need to adapt their team organisation, their choice of sub-groups and their allocation of individual roles, for each phase of the project. Technical quality, integration, comprehension, creativity, team working, communication and project management are all part of the experience.

Module purpose:  This module was conceived to answer the SARTOR 3 requirement that each MEng student participates in a multi-disciplinary design activity. It involves students from Aerospace, Civil, Chemical, Electronic, Mechanical and Medical Engineering working in groups which contain at least 3, and often 4, disciplines. The projects are conceived by Royal Academy of Engineering (RAE) Visiting Professors from Industry (who enjoy the active support of their sponsoring organisation). It aims to emulate an intensive Industrial Design Project.      

Engineering activity can have a significant societal impact and engineers must operate in a responsible and ethical manner, recognise the importance of diversity, and help ensure that the benefits of innovation and progress are shared equitably and do not compromise the natural environment or deplete natural resources to the detriment of future generations.

The module covers the principles of linear elastic and elastic plastic fracture mechanics and their application to predicting the performance of different materials and associated structural components under short-term and long term loading.  Further the concepts and principles underlying finite element stress analysis and its application are presented. Students digital capabilities are developed throughout this module including some basic data handling and programming skills, specifically using mathematical formulae and functions, including: variables, assignments, operators, built-in functions and plotting, Matlab scripts, and functions. A key element of the module is problem solving, thus developing students' resourcefulness. Efficient mechanical design, covering a full range of engineering materials, facilitates lightweighting, and in this way supports a sustainability agenda.